1/8" (#4) POP Blind Rivet Copper / Steel

1/8" Copper Open End Dome Head Blind POP Rivets

POP Rivet, or Blind Rivet, in Copper / Zinc Plated Steel


  • 1/8" or #4 (Rivet Sizing Chart)
  • Domed head rivets are used when there is no access to the blind side of the two materials
  • Most common rivet head
  • Used to join two materials together quickly
  • After mandrel breaks off domed head is left exposed
  • Copper and brass rivets are best for fastening copper or brass sheets
  • Hat:Copper | Mandrel: Zinc Plated Steel
  • Used both for their corrosion resistant qualities, as well as, their decorative look
  • Perfect for most environments because of their superior thermal and electrical conductivity

Copper/Zinc Open End Blind Rivet Spec Sheet

Select Products Below
See Product Specifications
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...
Product Specifications
Color
Yellow
Drill (Hole) Size
#30
Flange Diameter Nominal
0.25
Head Height Max
0.04
Head Style
Dome
Mandrel Diameter Nominal
0.076
Material
Copper / Zinc Plated Steel
Other
Open End
Pilot Hole
0.129 - 0.133
Product Type
Blind Rivets
Rivet Diameter
(#4) 1/8" (.125)
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances