Magnetic Nutsetters - 1/4" Shank

1/4" Magnetic Nutsetters

1/4" Shank Magnetic Nut Driver Bits


Magnetic Nut setters feature a 1/4 inch shank, and can be used in most quick release impact drivers like a power hand drill. Magnetic Nut Setters hold the fastener being set in place with a high strength industrial magnet, freeing up the installer's hands, especially in tight spaces. This allows for more mobility and less effort involved in setting a nut. Nut setters in this selection are available in either a 1-3/4 inch or 2-1/2 long shank. The size of a hex drive is determined quickly by an etched identifier on the side of the bit. Nut setters are made from S2 modified steel for professional performance, and are heat treated for extreme durability and to prevent wear.

  • Made from S2 modified shock resistant steel for professional performance and durability
  • High strength industrial magnet
  • Precision controlled heat treatment for extreme durability and wear protection
  • Gunmetal Grey finish

Trade Names: Hex Nut Setter Bits

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Magnetic Nutsetters - 1/4" Drive x 1-3/4" Length
SKU #1060-008-0002
Magnetic Nutsetters - 1/4" Drive x 1-3/4" Length
SKU #1060-008-0002
1
$4.36 (4.36/ea)
2
$7.94 (3.97/ea)
5
$19.10 (3.82/ea)
10
$36.80 (3.68/ea)
100
$292.00 (2.92/ea)
Subtotal: $0.00 /
Magnetic Nutsetters - 1/4" Drive x 2-1/2" Length
SKU #1060-008-0010
Magnetic Nutsetters - 1/4" Drive x 2-1/2" Length
SKU #1060-008-0010
1
$5.10 (5.1/ea)
2
$8.68 (4.34/ea)
5
$20.85 (4.17/ea)
10
$40.30 (4.03/ea)
100
$350.00 (3.5/ea)
Subtotal: $0.00 /
Magnetic Nutsetters - 5/16" Drive x 1-3/4" Length
SKU #1060-008-0018
Magnetic Nutsetters - 5/16" Drive x 1-3/4" Length
SKU #1060-008-0018
1
$5.10 (5.1/ea)
2
$8.68 (4.34/ea)
5
$20.85 (4.17/ea)
10
$40.30 (4.03/ea)
Subtotal: $0.00 /
Magnetic Nutsetters - 5/16" Drive x 2-1/2" Length
SKU #1060-008-0026
Magnetic Nutsetters - 5/16" Drive x 2-1/2" Length
SKU #1060-008-0026
1
$6.56 (6.56/ea)
2
$10.28 (5.14/ea)
5
$24.80 (4.96/ea)
10
$47.70 (4.77/ea)
100
$467.00 (4.67/ea)
Subtotal: $0.00 /

Product Specifications
System of Measurement (Unit)
Inch
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances