#10-24 Knurled Thumb Machine Screw Solid Brass

#10-24 Brass Knurled Head Thumb Screws

Diameter - Thread Pitch: #10-24


  • Knurled head intended to be driven by fingers
  • ASME Standards specific
  • A machine screw is commonly identified by its small size
  • Aesthetically pleasing and typically used for ornamental products
  • The more zinc in a screw the lighter it will tend to be
  • Brass is corrosive resistant but very soft material
  • Commonly used for:
    • Firearms
    • Weather Stripping
    • Pipes

#10-24 Knurled head thumb machine screws are available in corrosion resistant brass.
NOTE: Color and sheen may vary

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
Knurled Thumb Machine Screw Solid Brass - #10-24 x 3/8"
SKU #1018-10002-0002
Knurled Thumb Machine Screw Solid Brass - #10-24 x 3/8"
SKU #1018-10002-0002
1
$1.02 (1.02/ea)
25
$24.75 (0.99/ea)
100
$95.00 (0.95/ea)
1000
$930.00 (0.93/ea)
Subtotal: $0.00 /
Knurled Thumb Machine Screw Solid Brass - #10-24 x 1/2"
SKU #1018-10002-0014
Knurled Thumb Machine Screw Solid Brass - #10-24 x 1/2"
SKU #1018-10002-0014
1
$1.11 (1.11/ea)
25
$26.75 (1.07/ea)
100
$103.00 (1.03/ea)
1000
$1,010.00 (1.01/ea)
Subtotal: $0.00 /
Knurled Thumb Machine Screw Solid Brass - #10-24 x 3/4"
SKU #1018-10002-0026
Knurled Thumb Machine Screw Solid Brass - #10-24 x 3/4"
SKU #1018-10002-0026
1
$1.24 (1.24/ea)
25
$30.75 (1.23/ea)
100
$116.00 (1.16/ea)
1000
$1,140.00 (1.14/ea)
Subtotal: $0.00 /
Knurled Thumb Machine Screw Solid Brass - #10-24 x 1"
SKU #1018-10002-0038
Knurled Thumb Machine Screw Solid Brass - #10-24 x 1"
SKU #1018-10002-0038
1
$1.32 (1.32/ea)
25
$31.50 (1.26/ea)
100
$124.00 (1.24/ea)
1000
$1,210.00 (1.21/ea)
Subtotal: $0.00 /



FREQUENTLY USED WITH

1
$2.30 (2.3/ea)
25
$21.50 (0.86/ea)
100
$79.00 (0.79/ea)
1000
$770.00 (0.77/ea)
Subtotal: $0.00 /
1
NA
25
$3.00 (0.12/ea)
100
$9.00 (0.09/ea)
1000
$70.00 (0.07/ea)
Subtotal: $0.00 /
1
NA
25
$4.00 (0.16/ea)
100
$10.00 (0.1/ea)
1000
$80.00 (0.08/ea)
Subtotal: $0.00 /
1
NA
25
$4.25 (0.17/ea)
100
$11.00 (0.11/ea)
1000
$100.00 (0.1/ea)
Subtotal: $0.00 /
1
NA
25
$12.50 (0.5/ea)
100
$36.00 (0.36/ea)
1000
$330.00 (0.33/ea)
Subtotal: $0.00 /

Product Specifications
ANSI
B18.6.3
Color
Yellow
Color May Vary
Color and sheen may vary
Corrosion Resistant
Yes
Drive Style
Thumb
Elongation
10% - 25%
Hardness
40-75 Rockwell B
Head Diameter
0.440" (Just Over 7/16")
Head Style
Thumb
Material
Brass
Overall Head Height
3/8" (From Bottom to Top of Head)
Product Type
Knurled Head Thumb Screws
System of Measurement (Unit)
Inch
Tensile PSI
50,000 - 65,000 PSI
Thread Diameter
(#10) Max 0.1890 - Min 0.1818
Thread Direction
Right Hand
Thread Pitch (Count)
24 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Yield PSI
30,000 - 50,000 PSI