Long Arm Hex Allen Keys
Hex Width Across Flats: 3/32"
Long Arm Hex Allen Keys are used to tighten and loosen fasteners with an internal hex drive. Hex keys are available in both short arm and long arm varieties to offer optimal leverage and reach for varying installations. In addition, each hex key has a long arm and a short arm, our product specifications provide the lengths for each arm for your convenience.
Long Arm Hex Keys provide more leverage to install an internal hex or socket head screw. Long Arm Hex Keys have a Longer arm than Short arm Allen wrenches to create more installation leverage and control. For example, a 1/4 hex key in short arm has a length of 3.25", while a 1/4 long arm hex key has a length of 5.25", a full 2 inches longer.
|
Product Specifications:
|
|
Hex Allen Key - Long Arm
|
|
Hexagon With Across Flats: (3/32") Max 0.0938 - Min 0.0927
|
|
Length of Long Arm: 3.375
|
|
Length of Short Arm: 0.656
|
|
Minimum Torsional Shear Strength LB INCH: 46
|
|
Minimum Torsional Yield LB INCH: 40
|
Product Specifications may vary slightly +/-
within IFI Tolerances
|
Sizes Listed As:
Hex Width Across Flats
.jpg)
