3/4"-10 Carriage Bolt Hot Dipped Galvanized 307A Grade A

3/4"-10 Hot Dip Galvanized Carriage Bolt

Diameter - Thread Pitch: 3/4-10


3/4"-10 Hot dipped galvanized carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.

  • Square section grips into the part being fixed (typically wood)
  • Prevents the bolt from turning when the nut is tightened
  • Carriage Bolts under 6 inches are fully threaded
  • Sizes over 6 inches in length have a shoulder
  • Coarse Thread
Hot Dipped Galvanized assemblies should be used exclusively. If you use a HDG bolt you must also use a HDG nut.


Select Products Below
Product Specifications
Body Diameter
3/4" (Max 0.750 - Min 0.741)
Color
Gray
Corrosion Resistant
Yes
Finish
Hot Dip Galvanized
Head Style
Domed
Material
Steel
Other
All Carriage Bolts under 6 inches are fully threaded. Sizes over 6 inches in length have a shoulder.
Overall Head Height
0.406
Product Type
Carriage Bolt
Square Neck Depth
0.406"
Square Neck Width
0.768"
Thread Direction
Right Hand
Thread Pitch (Count)
10 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances
Select Products Below
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...