Brown Ipe Clip Kits - EXTREME Tall 525 CT
525 Brown EXTREME Tall Ipe Clips with Accompanying Fasteners
The unique design of Ipe clips allow for more tolerance in grooved side profiles while increasing hold-down area, all while remaining hidden and out of sight. Perfect for giving your deck a polished and professional look while allowing room for boards to grow and shrink naturally.
- 525 CT
- Brown polymer coating on clips
- Includes additional fasteners necessary for assembly
- Extreme Tall Clips space deck boards at 3/32" apart and 0.375" tall as opposed to 0.250" tall under the base
- Used for air-dried hardwood, composite or PVC decking
- UV resistant
- No extra tools required for installation
- Kit Contains:
- Ipe Clips
- Trim Head 305 Stainless Steel Deck Screws
- Ipe Plugs
- Drill and Driver Bits
This Ipe Clip Kit has an estimated coverage of 300 sq. ft. assuming 6" wide boards and 16" on center.
Printable Ipe Clip Installation Guide - A Printable Guide with Pictures
All Hidden Deck Fasteners sold by Albany County Fasteners are proudly Made in the USA
Brown EXTREME Tall Ipe Clip 2 Gallon Contractor Bucket
Ipe Clips require a slotted or notched board for installation. You can either get pre-slotted wood boards or make your own slots in wood boards with a Router Bit.
Contractor Bucket Includes The Following:
|525||Brown Ipe Clips - EXTREME Tall|
|570||#8 x 2" 316 Stainless Steel T15 Star Drive Trim Head Deck Screws (BROWN)|
|3||1/8" High Speed Drill Bit|
|3||T15 Star Drive Bit|
Pictured below is how EXTREME Ipe Clips are installed. Screws are installed at a 45 degree angle to hold the decking tight to the joist while allowing one side of the deck board to remain free to contract.