Black Ipe Clip Kits - EXTREME4 525 CT
525 Black EXTREME4 Ipe Clips with Accompanying Fasteners
The unique design of Ipe clips allow for more tolerance in grooved side profiles while increasing hold-down area, all while remaining hidden and out of sight. Perfect for giving your deck a polished and professional look while allowing room for boards to grow and shrink naturally.
- 525 CT
- Black polymer coating on clips
- Includes additional fasteners necessary for assembly
- Extreme4 Clips space deck boards at 5/32" apart
- Used for air-dried hardwood, composite or PVC decking
- UV resistant
- No extra tools required for installation
- Kit Contains:
- Ipe Clips
- Trim Head 305 Stainless Steel Deck Screws
- Ipe Plugs
- Deck Board Spacers
- Driver and Drill Bits
This Ipe Clip Kit has an estimated coverage of 300 sq. ft. assuming 6" wide boards and 16" on center.
Printable Ipe Clip Installation Guide - A Printable Guide with Pictures
All Hidden Deck Fasteners sold by Albany County Fasteners are proudly Made in the USA
Black EXTREME4 Ipe Clip 2 Gallon Contractor Bucket
Ipe Clips require a slotted or notched board for installation. You can either get pre-slotted wood boards or make your own slots in wood boards with a Router Bit.
Bucket Dimensions (525CT Kit) - 9-7/8" x 9-7/8" x 7-9/16"
Contractor Bucket Includes The Following:
|525||Black Ipe Clips - EXTREME4|
|570||#8 x 2" 305 Stainless Steel T15 Star Drive Trim Head Deck Screws (BLACK)|
|6||5/32" Deck Board Spacers|
|3||1/8" High Speed Drill Bit|
|3||T15 Star Drive Bit|
Pictured below is how EXTREME4 Ipe Clips are installed in Air-Dried Hardwoods. Screws are installed at a 45 degree angle to hold the decking tight to the joist while allowing one side of the deck board to remain free to contract.
Pictured below is how EXTREME4 Ipe Clips are installed in Kiln-Dried Hardwoods. Screws are installed at a 45 degree angle to hold the decking tight to the joist while allowing one side of the deck board to remain free to expand.