5/8"-11 Hot Dip Galvanized Carriage Bolt

5/8"-11 Hot Dip Galvanized Carriage Bolt

Diameter - Thread Pitch: 5/8-11


  • Square section grips into the part being fixed (typically wood)
  • Prevents the bolt from turning when the nut is tightened
  • Carriage Bolts under 6 inches are fully threaded
  • Sizes over 6 inches in length have a shoulder
  • Coarse Thread

5/8"-11 Hot dipped galvanized carriage bolts have a domed or countersunk head, and the shank is topped by a short square section under the head.

Hot Dipped Galvanized assemblies should be used exclusively. If you use a HDG bolt you must also use a HDG nut.


Select Products Below
See Product Specifications
Size:
Qty
Size
Select Package Quantity
SubTotal
Loading ...
Product Specifications
Color
Gray
Corner Radius on Square
0.078"
Corrosion Resistant
Yes
Filet Radius
0.062"
Finish
Hot Dip Galvanized
Head Diameter
Max 1.344 - Min 1.219
Head Style
Dome
Material
Steel
Other
All Carriage Bolts under 6 inches are fully threaded. Sizes over 6 inches in length have a shoulder.
Overall Head Height
Max 0.344 - Min 0.313
Product Type
Carriage Bolt
Square Neck Depth
Max 0.344 - Min 0.313
Square Neck Width
Max 0.642 - Min 0.616
System of Measurement (Unit)
Inch
Thread Direction
Right Hand
Thread Pitch (Count)
11 Per Inch
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances