Metric Machine Screws, Phillips Flat Head, Stainless Steel A2 (18-8), M2 x .4

Metric Machine Screws, Phillips Flat Head, Stainless Steel A2 (18-8), M2 x .4

Diameter - Thread Pitch: M2-0.40


  • Used with nuts or driven into pre-drilled holes
  • 90 Degree countersunk head
  • Flat head runs flush with the surface of the installation material
  • A machine screw is commonly identified by its small size
  • A2 Stainless steel is the metric industry standard stainless steel
  • Designed for long lasting, exterior applications due to their corrosion resistance and durability

M2-0.40 Metric Phillips flat head machine screws in A2 Stainless Steel.
Sizes listed as: Diameter - Thread Pitch x Length from Top of Head

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size/SKU
Select Package Quantity Price
SubTotal
M2-0.40 x 4M
M2-0.40 x 4M
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00 /
M2-0.40 x 5M
M2-0.40 x 5M
1 $0.07 (0.07/ea)
100 $3.00 (0.03/ea)
1000 $20.00 (0.02/ea)
Subtotal: $0.00 /
M2-0.40 x 6M
M2-0.40 x 6M
1 $0.07 (0.07/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
M2-0.40 x 8M
M2-0.40 x 8M
1 $0.07 (0.07/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
M2-0.40 x 10M
M2-0.40 x 10M
1 $0.07 (0.07/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /
M2-0.40 x 12M
M2-0.40 x 12M
1 $0.08 (0.08/ea)
100 $4.00 (0.04/ea)
1000 $30.00 (0.03/ea)
Subtotal: $0.00 /

Frequently Used With

1 $0.07 (0.07/ea)
100 $2.00 (0.02/ea)
1000 $10.00 (0.01/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $2.00 (0.02/ea)
1000 $10.00 (0.01/ea)
Subtotal: $0.00
1 $1.13 (1.13/ea)
10 $9.00 (0.9/ea)
50 $43.50 (0.87/ea)
Subtotal: $0.00
1 $1.00 (1/ea)
10 $8.10 (0.81/ea)
50 $38.00 (0.76/ea)
Subtotal: $0.00
1 $0.07 (0.07/ea)
100 $2.00 (0.02/ea)
1000 $10.00 (0.01/ea)
Subtotal: $0.00
1 $0.89 (0.89/ea)
100 $48.00 (0.48/ea)
1000 $400.00 (0.4/ea)
Subtotal: $0.00

Product Specifications
Color
Silver
Corrosion Resistant
Yes
Countersink
82 Degree
Drive Style
Phillips
Grade
A2
Head Diameter
Max 3.80 - Min 3.50
Head Style
Flat
Material
Stainless Steel
Overall Head Height
Max 1.2
Phillips Drive
#0 - #1
Product Type
Metric Phillips Flat Head Machine Screw
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
0.40 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances