Home > Nuts > Hex Machine Screw Nuts Extra Small Pattern (Small OD) > Zinc Plated Steel >

Zinc Plated Grade 2 Hex Machine Screw Extra Small Pattern Nuts - Select Size
Hex Machine Screw Extra Small Pattern Nuts - Zinc Plated Steel


 

Extra Small Pattern Hex Machine Screw Nuts - Zinc Plated Steel

Hex Nuts for Diameters under 1/4" with a Smaller Width Across Flats

A machine screw small pattern nut (micro) is used with machine screws to mechanically connect materials together in small tight areas. This type of nut are used with smaller machine screw sizes under 1/4" micro. Zinc plated steel provides standard protection.

Extra Small Pattern Machine Screw Nuts have a smaller Flats measurement than standard Machine Screw Nuts, which are Hex Nuts for screws and bolts in diameters under 1/4".

Extra Small Pattern Hex Machine Screw Nuts in this selection are Case Hardened (CR+3) Zinc Plated Grade 2 Steel.


Sizes Below Listed As:
Diameter - Thread Pitch x Width Across Flats (F) x Height (H)



Item# Item Name Our Price Qty Add
1102-125-0002 MS Extra Small Pattern Nuts Zinc - #8-32 x 1/4" F x 3/32" H - Qty-1
$0.15
1102-125-0004 MS Extra Small Pattern Nuts Zinc - #8-32 x 1/4" F x 3/32" H - Qty-25
$0.25
1102-125-0006 MS Extra Small Pattern Nuts Zinc - #8-32 x 1/4" F x 3/32" H - Qty-100
$0.90
1102-125-0008 MS Extra Small Pattern Nuts Zinc - #8-32 x 1/4" F x 3/32" H - Qty-250
$2.12
1102-125-0010 MS Extra Small Pattern Nuts Zinc - #8-32 x 1/4" F x 3/32" H - Qty-1000
$8.04
Check the items box you wish to purchase, then click


Browse for more products in the same category as this item:

Nuts > Hex Machine Screw Nuts Extra Small Pattern (Small OD) > Zinc Plated Steel
Nuts > Hex Machine Screw Nuts Extra Small Pattern (Small OD)
Nuts