M1.6 x .35 Socket Set Screw Cup Point Metric A2 Stainless Steel

M1.6-0 .35 Stainless Steel Metric Socket Set Screws

Screw Diameter x Thread Pitch: M1.6-0.35


M1.6-0.35 Set Screws are blind (headless) fasteners with an internal hex drive. It is this drive style that classifies Stainless Steel Screws in this selection as Socket Set Screws, which are driven by a hex bit or Allen wrench.

  • Used in a tapped hole, and tightened to hold an exterior object in place within or against another object
  • Held with friction between the point or end of the screw and the material that is being fastened
  • Used in applications where a flush installation and the look of the final assembly are important
  • Often plugged after installation for a hidden fastener look
  • Commonly used for:
    • Gears
    • Pulleys
    • Wheels in machines
Stainless Steel Metric Socket Set Screws in A2 Stainless Steel offer the Fastener Industry standard for corrosion and rust resistance for Metric Fasteners, and are recommended for use in exterior applications, or those that are exposed to fresh water moisture.

Sizes Listed As:
Diameter x Thread Pitch x Length from Underside of Head
FT = Full Thread
PT = Partial Thread

Select Products Below See Product Specifications

NA = "Not Sold In Single Quantity"

Size
Select Package Quantity
SubTotal
M1.6 x .35 x 2.5M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0002
M1.6 x .35 x 2.5M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0002
1
$1.18 (1.18/ea)
25
$28.75 (1.15/ea)
100
$111.00 (1.11/ea)
1000
$1,090.00 (1.09/ea)
Subtotal: $0.00 /
M1.6 x .35 x 3M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0012
M1.6 x .35 x 3M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0012
1
$0.83 (0.83/ea)
25
$19.75 (0.79/ea)
100
$75.00 (0.75/ea)
1000
$730.00 (0.73/ea)
Subtotal: $0.00 /
M1.6 x .35 x 4M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0022
M1.6 x .35 x 4M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0022
1
$0.86 (0.86/ea)
25
$20.75 (0.83/ea)
100
$79.00 (0.79/ea)
1000
$780.00 (0.78/ea)
Subtotal: $0.00 /
M1.6 x .35 x 5M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0032
M1.6 x .35 x 5M Socket Set Screw Cup Point Metric A2 SS
SKU #401000-0032
1
$0.86 (0.86/ea)
25
$21.25 (0.85/ea)
100
$81.00 (0.81/ea)
1000
$790.00 (0.79/ea)
Subtotal: $0.00 /

Product Specifications
Additional Sizing Info
Full Thread
Color
Silver
Corrosion Resistant
Yes
Cup Point Diameter
Max 0.724 - Min 0.711
Diameter
M1.6
Drive Style
Internal Hex (Allen)
Grade
A2
Head Style
No Head
Hex Drive
0.7mm
Material
Stainless Steel
Point Type
Cup
Product Type
Socket Set Screws
System of Measurement (Unit)
Millimeter
Thread Direction
Right Hand
Thread Pitch (Count)
0.35 mm
Thread Standard
UNC
Thread Type
Coarse
Tolerance (IFI)
Actual measurements may vary slightly +/- depending on production run within IFI Tolerances