You are here: Home > Hex Head Bolts > Hex Cap Screw-Partial Thread > Hot Dipped Galvanized

1070-030
1/4"-20 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-032
5/16"-18 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-034
3/8"-16 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-036
7/16"-14 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-038
1/2"-13 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-040
5/8"-11 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-044
3/4"-10 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-046
7/8"-9 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-048
1"-8 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-050
1-1/8"-7 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-052
1-1/4"-7 Hex Cap Screws Hot Dipped Galvanized 307A Grade A

1070-054
1-1/2"-6 Hex Cap Screws Hot Dipped Galvanized 307A Grade A


Hot Dip Galvanized Hex Cap Screws

Hex Cap Screws and Tap Bolts

Hot Dip Galvanized Steel Hex Bolts

Hex Cap Screws, commonly referred to as Hex Bolts, or Hex Head Bolts are bolts with a shoulder in longer lengths. Hex Cap Screws are fully threaded in shorter lengths (usually around up to 1-1/2 inch, depending upon the bolt diameter), and partially threaded with a shoulder beneath the fastener hex head in longer lengths.

A hex cap screw is a cap screw with a hexagonal head, designed to be driven by a wrench (spanner). An ASME B18.2.1 compliant cap screw has somewhat tighter tolerances than a hex bolt for the head height and the shank length. The nature of the tolerance difference allows an ASME B18.2.1 hex cap screw to always fit where a hex bolt is installed but a hex bolt could be slightly too large to be used where a hex cap screw is designed in.

Hot Dipped Galvanized finish offers corrosion resistance to steel fasteners due to the molten zinc bath finishing process, creating a bonded alloy coating.