Hex Cap Screws and Tap Bolts
Zinc Plated Grade 2 Steel Hex Head Bolts
A hex cap screw is a cap screw with a hexagonal head, designed to be
driven by a wrench (spanner). An ASME B18.2.1 compliant cap screw has
somewhat tighter tolerances than a hex bolt for the head height and the
shank length. The nature of the tolerance difference allows an ASME
B18.2.1 hex cap screw to always fit where a hex bolt is installed but a
hex bolt could be slightly too large to be used where a hex cap screw is
Hex Cap Screws, commonly referred to as Hex Bolts, or Hex Head Bolts are bolts with a shoulder in longer lengths. Hex Cap Screws are fully threaded in shorter lengths (usually around up to 1-1/2 inch, depending upon the bolt diameter), and partially threaded with a shoulder beneath the fastener hex head in longer lengths.
All Hex Cap Screws and Tap Bolts in this selection are zinc plated Grade 2 steel. Grade 2 Zinc Hex Bolts are distinguished by having no hash marks on the top of each bolt's head.